Gypsum Plaster Cornis Strip Decoration and Design M-109

Gypsum Plaster Cornis Strip Decoration and Design M-109

Nova Gypsum Decoration is the best Gypsum Plaster Cornis Strip Decoration and Design Company in Dhaka, Bangladesh.
Size: 4.5″

Simple and elegant – and univerally popular.  Available in 2m or 2.6m sections and now also in a flexible

Gypsum Cornis Strip for fitting to curved walls/bay windows etc (flexible in 2m lengths only).
Pre-cut internal and external corner sections now available  enabling faster and easier installation without expensive mistakes – we are the only supplier to offer this option  (see CX100/Internal and CX100/External on right/below)
It is essential to use EXTRA FIX (either FX200 (310ml cartridge) or FX210 (small tube) when joining two sections together (either corners or on a straight run).  This is a high strength ‘superglue’ that will guarantee there won’t be any cracks appearing in future years.  The bonded join will actually become stronger than the material itself.
For mounting the coving, we strongly recommend using a silicon based adhesive  – FDP700 (310ml cartridge) – especially if any wall or ceiling mounting point has been plastered/skimmed within the last 3 months, or the ambient temperature is less than 10 degrees celcius.  Otherwise the standard water based adhesive FDP500 (cartridge) or FDP600 (large tub) should suffice.

Rope profile premium coving. Manufactured from a lightweight, yet strong high density polyurethane resin material which captures the finest detail and is indistinguishable from traditional plaster coving. Produced in metal moulds, rather than using an extrusion process to allow very deep relief. Our premium coving is much lighter than plaster (gypsum) coving – and much easier to handle and fix. Available in 2400mm lengths for easy fixing.

Dimensions: 56mm along ceiling x 56mm down wall x 2400mm length.
Authentic deep relief.
Pre-primed – for easy painting.
Durable polyurethane resin material captures the finest detail.
Lightweight and easy to install.
Allows some flexibility when fixing to uneven walls and ceilings.
Won’t crack, rot or split easily.

Cuts beautifully with any standard 20-22″ hard point or panel saw for perfect joints and mitres using an appropriate mitre block. More tolerant of uneven walls than our Styrene resin coving. Rigid, crisp white pre-primed surface ready to be finished with any standard decorative coating.
Use MS Polymer Adhesive & Sealant to to glue each length of Polyurethane coving to the next. This produces an excellent flexible bond between each length of coving, to resist cracking at the joints. Also use it for fixing Polyurethane coving to standard interior wall and ceiling surfaces. It can also be used for filling gaps. We suggest that customers allow one 290ml cartridge of MS Polymer Adhesive & Sealant for fixing every 2-3 lengths of coving, depending on coving size. Finish with Decorators Caulk.
Check measurements of the coving on site before installing, as there may be some minor differences in the dimensions shown on our web site. Length shown is underestimated to allow for trimming of ends if neccessary. These products are produced by hand using metal moulds to produce an unrivaled authentic deep relief, it is expected that you may occasionally find superficial scratches or marks on the surface. Lightly denib facing surfaces, and brush down to remove any surface dust and particles before installation.

If you need gypsum plaster Cornis Strip decoration and design, you can call us +8801755997055, +8801741847344

DMCA.com Protection Status

START TYPING AND PRESS ENTER TO SEARCH